Shopping Cart
Your cart is empty.
Browse Categories
Search
Mailing Lists
Enter Email Here!
NEW - MDT Pipe Puller
These MDT pipe pullers stop the ingress of mud, water and drilling fluids into the pipe by sealing insides during pulling. Seals both SDR11 and SDR17.6 wall thickness pipe using a reversible sealing cartridge
Starting Price: From $240.00 to $1,950.00

Product Options

1 1/4" IPS ($240.00)
1 1/2" IPS ($292.00)
2" IPS ($352.00)
3" IPS ($541.00)
4" IPS ($667.00)
6" IPS ($1,196.00)
8" IPS ($1,950.00)

Detailed Description

A Pipe Puller that is a must have for Horizontal Directional Drilling (HDD), Moling and Pipe Bursting offering a direct connection to leading end of PE, HDPE or MDPE pipe. Stops the ingress of mud, water and drilling fluids into the pipe by sealing insides during pulling. Simple to install and remove. Proven reliability, tough design exceeds yield strength of pipe. No need to use duct tape or foam pig.
Based on the proven Standard Pipe Puller design, the inside of the pipe is sealed against liquids and mud by a rubber seal housed in the nose cone/outer sleeve assembly. This bears against the end of the pipe aided by a thrust plate and a strong spring. The unique feature is the patented three-part reversible cartridge. This allows one puller to seal both SDR11 and SDR17.6 wall thickness pipe using a reversible sealing cartridge so larger wall thicknesses can be sealed by using larger O-rings.
An O-ring seal at the rear of High Tensile Eyebolt prevents fluid ingress at this point. The outer sleeve protects the leading end of the pipe from damage as it is being pulled through the earth. The eyebolt is fitted with a rear nut or eye to prevent the Pipe Puller form coming apart during installation or removal. 
To install, place a bar through the eyebolt and screw clockwise until the gripper teeth engage the inside of the pipe. To remove from the pipe, screw the eyebolt counter-clockwise. A tap on the end of the eyebolt with a hammer will push the cones back and release the gripper teeth. The more you pull on the eyebolt, the more the teeth grip the pipe. They will never let go during pullback.